Bravo’s Pressure Regulating Tamper takes the guesswork out of tamping, whether you pull shots at home or behind a café bar. A pair of springs sets the force, so the result no longer depends on how hard you happen to push that morning. The tamper is made in Brazil.
Highlights
- Two-spring mechanism. An outer and an inner spring work together to deliver the same compression on every puck.
- Adjustable force. It ships set to 34 lb; remove the screw cap on top of the handle, and each millimeter you turn the Allen bolt takes off about 2.5 lb, down to 26 lb.
- Clear end point. When the upper axis meets the screw cap, you have reached the set pressure, which keeps you from over-compressing the coffee.
- Level by design. The outer rim rides on the edge of the portafilter as you press, so the flat stainless steel base goes down straight.
- Two sizes, two handles. Choose a 54.7 mm or 58.5 mm base with an aluminum or wood handle.
Good to know
Once you have found your setting, secure the Allen bolt with thread seal tape. The 54.7 mm size does not fit 54 mm Breville or Solis machines. The 58.5 mm size works with most 58 mm portafilters, although baskets that narrow toward the bottom can stop it from reaching the coffee. After each tamp, let the tamper rise slowly so the coffee bed is not disturbed.












































Reviews
There are no reviews yet.