If you want to steer every shot by hand, the GS3 MP is built around exactly that. A paddle on top of the saturated group decides how water reaches the coffee, while two stainless steel boilers let you brew and steam at the same time.
Highlights
- Paddle flow control. Swinging the paddle opens a conical valve inside the group, so you choose how quickly pressure builds, from a soft pre-infusion to a slow, restricted pull.
- Gauge on the group. A manometer mounted on top of the group shows brew pressure in real time as you move the paddle.
- Two boilers, quiet pump. A 44 fl oz (1.3 L) brew boiler works alongside a 118 fl oz (3.5 L) PID-controlled steam boiler, fed by a rotary pump that runs almost silently.
- Cool-touch steam wand. The double-walled steel wand stays comfortable to handle and delivers dry steam for fine microfoam; a lever turns it on.
- Tank or water line. Fill the 84.5 fl oz (2.5 L) pull-out reservoir or plumb the machine in, and pre-infusion stays available either way.
- Programmable keypad. Set brew and steam temperatures, the clock and automatic on and off times; if water runs low, the display warns you and the machine pauses until you refill.
Good to know
A backlit keypad tells you the GS3 is ready to brew. Excess water from pre-infusion and low-pressure pulls goes to the roomy drip tray; pull the tray out to clean it or to reach the reservoir. The paddle and the steam lever take a few sessions to master.

































Reviews
There are no reviews yet.