Built with small kitchens in mind, the Mechanika VI Slim is an E61 heat exchanger machine that takes up less than 10 inches of counter width. Because brewing and steaming run at the same time, it is a good match if your routine includes cappuccinos and lattes as well as straight shots.
Highlights
- Less temperature babysitting. A PID keeps the boiler in check, so you spend less time tracking temperature and running the cooling flushes heat exchangers normally need.
- One switch, three jobs. The three-position switch near the bottom right of the machine chooses among preset boiler temperatures, and the same switch handles pre-infusion and eco mode.
- Upright boiler. Inside, a 74.4 fl oz (2.2 L) boiler of insulated stainless steel is mounted vertically: that orientation keeps the machine narrow, and the insulation cuts wasted heat.
- Custom E61, two gauges. ECM’s own take on the E61 brew group works alongside one gauge for the brew circuit and one for the steam boiler.
- OPV within reach. Brew pressure is set at the over-pressure valve, which you get to from the top, under the reservoir lid.
- Swappable steam tips. The no-burn, fully articulating wand has a 2-hole tip you can swap for a different one.
Good to know
A pair of portafilters ships with the machine, along with single and double baskets. Water comes from a 101.4 fl oz (3 L) tank that lifts out for filling; there is no plumb-in option. A passive cup warmer sits on top of the mirror-polished stainless steel housing.













































Reviews
There are no reviews yet.