An espresso machine is a long-term investment, and a few minutes of care keeps it tasting good and running reliably for years. Coffee oils, milk residue and mineral scale cause most problems, and a simple routine deals with all three. Always check your machine’s manual first: it has the final word on cleaners, descaling and anything specific to your model.
After every session
- Purge and wipe the steam wand right after steaming. Milk dries quickly and can block the tip.
- Flush the group head for a few seconds after your last shot to rinse away loose grounds.
- Knock out and rinse the portafilter and basket instead of leaving a used puck in the machine.
- Empty the drip tray before it overflows, and wipe down the cup tray and body.
Every week
- Backflush with water if your machine has a three-way solenoid valve (most E61 and commercial-style machines do): fit a blind basket, run the pump for a few seconds, stop, and repeat several times.
- Soak the portafilter and baskets in hot water with an espresso equipment cleaner to remove coffee oils. Keep plastic or wooden handles out of the solution.
- Clean the shower screen and gasket area with a group brush.
- Wash the water tank and refill it with fresh water.
If you make several drinks a day, backflush with a dedicated espresso machine cleaner about once a week; lighter users can do it every few weeks. Machines without a three-way valve should not be backflushed — your manual will tell you which kind you have.
Every few months
- Replace the water filter if your machine or tank uses one.
- Descale according to your water hardness and the manufacturer’s instructions. Some machines, including many dual boilers, should not be descaled with off-the-shelf products at home, so check before you start.
- Inspect the group gasket. If the portafilter handle locks in further than it used to, or water leaks around it during a shot, it is time for a new one — often every 6 to 12 months with daily use.
- Clean your grinder: brush out the burrs and chute, and clear old grounds that go stale and affect flavor.
Water: the easiest way to prevent problems
Scale builds up faster with hard water, and it is the most common cause of serious repairs. Filtered or softened water that is still suitable for coffee prevents most scale before it starts. Avoid distilled water: it can make coffee taste flat, and some machines rely on minerals in the water to sense the boiler level. An inexpensive hardness test strip tells you where you stand.
Super-automatic machines
Super-automatics such as the Gaggia Cadorna Milk guide you through most of this with on-screen prompts for rinsing, milk system cleaning, descaling and filter changes. Follow the prompts, rinse the brew group if it is removable, and clean the milk system after every use.
Need a hand?
If something does not look or sound right, chat with us. We can help you work out whether it is a quick cleaning job or something for service — and because we are an authorized dealer, machines you buy from us are covered by the manufacturer’s warranty. Need a new machine or grinder instead? Start with our espresso machines.

