The Opus is Fellow’s all-purpose grinder for anyone just getting into specialty coffee or single dosing who wants one machine for every brew method. Operation comes down to a single button, yet the adjustment system leaves room to fine-tune as your technique improves.
Highlights
- C6-40 Burly Burrs. Fellow’s conical burr set turns at 350 RPM.
- 41 settings plus micro-adjustment. An inner ring around the lower burr gives finer control than the main steps alone.
- Cold brew to espresso. The fine end goes below 200 microns; lower numbers grind finer, and suggested ranges for each method are printed under the hopper lid.
- Timed single dosing. One, two or three presses run the motor for 30, 60 or 90 seconds, and holding the button grinds for up to 2 minutes. The motor stops by itself once the beans are gone.
- Less mess. Anti-static construction keeps grounds from clinging and further reduces retention.
- Tool-free burr access. Twist off the hopper and lift out the top burr by its fold-down handle, with no screws to undo.
Good to know
The hopper lid doubles as a volumetric measure, and one load takes up to 3.9 oz (110 g) of beans. The catch bin has a shaped wall that pours like a spout, attaches magnetically under the chute and comes with a portafilter attachment for grind-and-flip dosing. Choose Matte Black or Matte White.




































Reviews
There are no reviews yet.