New staff can pull consistent shots on the Vania 3 Group after very little training, because every brew button stops on its own once the programmed volume is reached. Setting those volumes calls for some espresso know-how, and good milk foam still takes practice, but day-to-day operation stays simple.
Highlights
- Shots that stop themselves. Four programmable buttons per group cover singles, doubles, cappuccinos and lattes, so a barista can start several drinks and turn to the next task.
- 17-liter boiler. Nickel-plated brass with a submerged, removable heat exchanger, sized for large operations.
- Steady brewing temperature. Heavy brass groups, the immersed heat exchanger and a powerful heating element help hold temperature through the rush.
- A steam wand on each side. Both wands are stainless steel and rotate, and an anti-siphon valve stops milk from being pulled back into the boiler.
- Hot water twice over. Two hot water dispensers handle tea, Americanos and hot chocolate.
Good to know
Plan for professional installation on a 220 V circuit with a 30 A breaker; the machine draws 4000 W and ships without a plug (NEMA L6-30P and L6-30R are suggested). Water and drain must be within 5 ft. A level sensor protects the boiler from running dry, and the groups take cups up to 5.75 in tall. Filter baskets, shower screens and group gaskets wear under constant use, so check them often and keep spares close by.
























Reviews
There are no reviews yet.